AutoXing Robot Delivery and Mapping Preparation

AutoXing Robot Models: Preparing for Delivery and Mapping

Preparing for Delivery

1. Schedule a video call with Propsera to do a walk through of the facility. 
            a. Prospera will look for areas of the building that may need to be restricted. (Glass walls, staircases, steep slopes, etc.) 
            b. Prospera will look over the chosen location for the charging dock to see if it is adequate. 
2. The robot will come in a large wooden crate pictured below. Make sure there is a plan for a clear route to get it into the building and that a dolly for transportation is present incase needed.



Choosing a Charging Dock Location

1. The charging dock should not be moved once the robot is mapped. Choose a location wisely. 
2. The charging dock must be against a wall. 
3. The other 3 sides of the charging dock must have 3ft of clearance on all sides for the robot to adjust itself while docking. 

**If putting the charging dock on a hard surface, there are adhesive strips on the bottom of the charger that can be used. The charger cannot be moved once these are used. **

Unboxing the Robot

1. The wooden crate around the robot can be dismantled using a crowbar. This is the easiest way to remove the robot from the shipping crate. 
2. If further instruction is needed, contact Prospera directly. 

Starting the Robot

1. Once the robot is unboxed, plug in the charging station at the agreed upon location. 
2. Turn the robot on using the external power buttons.
(These power button locations are for the Enlarged Waiter Robot. The Mars Unit and Enclosed Unit have different locations.)
      a. Turn the bottom power button on first.

     
      b. Then turn the upper power button on.


3. While the robot is starting, back it up onto the charging dock. The green light should be blinking. 



4. Connect the robot to the WIFI. Click the red button on the top right hand corner of the robot screen. 



5. Click "Settings."



6. Type in "9999" for the password.



7. Go to "System Settings."


8. Click the "WLAN" button with the WIFI symbol above it and connect the device to your WIFI network. 



9. The robot is now online and will be ready for the mapping stage. Nothing further needs done at this time. 

    • Related Articles

    • AutoXing Robot Models: Adjusting Delivery Stop Time

      Delivery Stop Time The delivery stop time or "countdown time" is how long the robot will stay at a delivery before it departs for either the next delivery or standby point. If the delivery is not "finished" (someone does not click on the button on ...

    • AutoXing Robot Models: Delivery Modes

      Different Delivery Modes Quick: Choose up to 4 different locations at once for the robot to travel to. The robot will go to the locations in the quickest, most efficient order. It will NOT go to them in the chosen order. Multi-Point: Choose an ...

    • AutoXing Robot Models: Delivery Music Changes and Uploads

      Changing the Delivery Music This setting change will adjust what sound the robot plays as it travels from task to task. There are preloaded sounds to choose from or a new MP3 file can be uploaded and used. How to Upload a New MP3 File 1. Click the ...

    • AutoXing Robot Models: Adding a Birthday Button

      How to Add Birthday Mode to a Robot's Main Page 1. Click the red button on the top right corner of the robot screen. 2. Click "Settings." 3. Type in "9999" for the password. 4. Go to "System Settings." 5. Tap on "System Info" ten times in a row. 6. ...

    • AutoXing Robot Models: Lost Robot

      Lost Robot Issues If the robot is having one of the following issues... The robot is getting stuck in areas it normally would not. The robot appears to be lost. The robot keeps saying to move out of its way, but there is nothing in its way. Try ...